Audio de-esser
Tame harsh s and sh sounds in speech or vocals by turning down only the high frequencies when they get too loud.
Accepted files: .wav,.mp3,.m4a,.aac,.flac,.ogg,.oga,.opus,.webm,audio/*. Choose one file. Up to 256 MiB in total.
One recording up to 256 MiB and 10 minutes; split frequency 2,000 to 12,000 Hz and no higher than 45 percent of the sample rate, threshold -60 to 0 dBFS, reduction 1 to 24 dB. WAV is read with every sample intact; other formats are decoded by your browser at 48 kHz. Everything is processed on your device and nothing is uploaded. Download: WAV in the source format or the format you choose, a JSON report, a CSV reduction trace and optionally the sibilance band as WAV. Reduce the detected high-frequency band; listen to check the effect on your voice. Up to 1,000,000 characters. Review the settings before running.
Your result
How to use Audio de-esser
- Choose the voice recording.
- Set the split frequency, the threshold and the largest reduction.
- Turn on the sibilance band export if you want to hear what is detected.
- Process, check how long the reduction was active and download the WAV.
Useful next steps
One recording up to 256 MiB and 10 minutes; split frequency 2,000 to 12,000 Hz and no higher than 45 percent of the sample rate, threshold -60 to 0 dBFS, reduction 1 to 24 dB. WAV is read with every sample intact; other formats are decoded by your browser at 48 kHz. Everything is processed on your device and nothing is uploaded. Download: WAV in the source format or the format you choose, a JSON report, a CSV reduction trace and optionally the sibilance band as WAV.
Split-band method
A high-pass filter separates a high-frequency band. When its level rises above the threshold, that band is reduced by up to the amount you set, with a 1 ms attack and a 60 ms release. The filter has a gradual transition around the split frequency, so nearby lower frequencies can also be affected.
Choosing settings
Try a split between 5,000 and 8,000 Hz and a maximum reduction of 6 to 8 dB, then listen and adjust for your recording. The split must be at least 2,000 Hz and no higher than 12,000 Hz or 45 percent of the sample rate, whichever is lower. A setting above that limit is rejected; it is not moved automatically. Export the detected band and audition it in the player to check that it contains the harsh sounds you want to reduce.
Reading the result
The report gives the largest reduction and how many seconds were reduced by more than 1 dB. The CSV lists the reduction in 10 ms steps.